MIS004-G  -  Mistral 3.3 - LWB - Gear Diff

Check these links for car  and diff manual

Mistral 3.3 Manual

Gear Diff Manual

Very pleased to introduce you the successor of Mistral 2.0: Mistral 3.3

Mistral 3.3 keep the V-link suspension at the rear, as we found to be extremely tuneable to every grip condition.
But still, we’ve done quite an improvement at the front end.

Of course we kept the major features of Mistral 2.0, such as:
Camber adjustedle by turnbuckles
Static caster is adjustable via dedicated shims
Adjustable dynamic caster value

On Mistral 3.3 wheelbase is now adjustable in step of 5mm for a range of 10mm.

Best part is that change the wheelbase require just a couple of minutes and no setup, via the use of a 2.5mm carbon frame subframe that carries all the front-end components.

This feature, allow the servo to be fixed in the lowest possible position, allowing a super low Center of Gravity.

Main chassis is made of 3mm carbon fibre, this allow us to pocket the battery area, keeping the lipo extremely low, again in the quest of the lowest CoG possible.

Great feature is that changing the wheelbase, will not require different body holes.

F1 is raced from wide 1/8 circuit to “mickey mouse” parking lot, so Mistral 3.3 will be offered in 2 versions, long and short.

Long one allow a wheelbase of 275-270-265mm

Short one allow a wheelbase of 265-260-255mm

As usual, Mistral 3.3 will be available with our sphere or gear diff.

Note: Servo is not included

Front and rear wing are not included